Brake disc rear, replacing: Installation

NOTE: For tightening torques, see: Tightening torque .

Installing the brake disc and caliper holder

Fig 1: Brake Disc And Caliper Holder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the brake disc.

NOTE: Be careful when handling the new brake disc. Careless handling can cause damage to the brake disc (out-of-true).

Install:

the new brake disc. Tighten the locating pin. Tighten. See Tightening torque
the brake caliper and the caliper holder. Use 2 new mounting screws. Tighten. See Tightening torque .