Checking the connectors

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Check the connector on the right power door mirror. Check for contact resistance and oxidation. Remedy if necessary.

  In particular, check for any damage

• Reinstall the components, reconnect the connectors etc.
• Ignition on.

  Check the outside temperature.

  Other information: 

  • To access the connector for the power door mirror, see Door mirror, replacing
  • See Checking wiring and terminals
  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the temperature within its permitted range? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Checking for a short-circuit