Checking component

The control module does not recognize the identity of the side impact sensor. Check that the P/N of the side impact sensor is correct.

Ignition on.

Read off the side impact sensor identity by clicking on the VCT 2000 symbol.

Replace the side impact sensor if no fault is found.

Other information: 

• To access or replace the side impact sensor, see Collision sensor, replacing .

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Impact Sensor

Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue when the fault has been remedied. 

• Continue 

  Refer to Verification