LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seats & Interior - Removal, Replacement And Installation >> Second Generation Power Seats (1999-2004) >> Bracket and cross member >> Removing bracket and cross member

Removing bracket and cross member

Fig 1: Identifying Bracket And Cross Member
GLL107288Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the seat from the car. See Removing power seats, tilting .

Remove the multi-connector. See Removing multi-connector .

Remove the control module. See Power seat module (PSM), replacing .

Cut the tie strap.

Remove one screw from the seat heater control module.

Disconnect the wiring.

NOTE:

Check that the wiring is correctly routed.

Remove the bracket and cross member carefully. The mounting points are easily broken.

scientia non olet · About LEMON Manuals