Upholstery middle head restraint rear: Overview
Removing the upholstery for the center head restraint
NOTE:
Since the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential information in the illustrations is always correct.
- Pull up the head restraint
- Open the trim at the bottom (2)
- Undo the Velcro strip
- Slide off the upholstery.
Installing the center head restraint upholstery
Install:
- the upholstery
- the Velcro strip
- trim (2)
- press down the head restraint.
NOTE:
Check that the seams are positioned correctly in relation to the frame.
Operation Number(s): 85584-2