Removing seat cushion upholstery
Remove:
- the half moon clips, 5 per side, from the lower edge of the seat cushion.
- the half moon clips, 4 per side, from the front edge of the seat cushion.
- all the connectors
- the tie straps around the cable harness.
Thread each connector individually through the hole in the seat cushion upholstery.
Remove:
- the half moon clips, 4, from the underside of the rear edge.
- the half moon clips, 1 on each side. The bottoms of the half moon clips are located in the spring.
Fold up the upholstery.
Remove:
- the half moon clips, 3 on each front-rear channel.
- the half moon clips, 2 on each lateral channel.
Replace the upholstery.