Installing seat cushion upholstery

Fig 1: Identifying Hole Cut In New Upholstery For Cable Harness

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

A new hole for the cable harness must be cut in the new upholstery. Use the old upholstery as a template.

Accurately measure and position the upholstery before securing it.

Fig 2: Identifying Half Moon Clips On Each Lateral Channel

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

Fig 3: Identifying Half Moon Clips On Each Front-Rear Channel

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

Pull the upholstery down.

Fig 4: Identifying Tie Straps Around Cable Harness

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

Thread the connectors through the hole in the upholstery.

Secure the connectors.

Secure the cable harness using tie straps.

Fig 5: Identifying Half Moon Clips On Underside Of Rear Edge

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

Note how the clip is located and how the wiring is routed.

Install: