Removing seat frame

Remove the SIPS bag and seat heater connectors and wiring.

Release the wiring from the backrest.

Fig 1: Identifying Screws And Mounting

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

Fig 2: Identifying Half Moon Clips On Side Of Cushion Underside

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Half Moon Clips At Front Edge Of Cushion

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 4: Identifying Half Moon Clips From Rear Edge Of Underside

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 5: Identifying Half Moon Clips On Sides And At Rib

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 6: Identifying Folded Up Upholstery

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fold up the upholstery.

Remove:

Fig 7: Identifying Half Moon Clips From Rear Edge Of Underside

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 8: Identifying Nut And Washers For Rear Height Adjuster Mounting

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 9: Identifying Nut For Front Height Adjuster Mounting

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 10: Identifying Half Moon Clips On Side Of Cushion Underside

Courtesy of VOLVO CARS OF NORTH AMERICA.

Pull straight out.

Angle the rail and the seat base so that they come apart.

Angle and turn the gas strut.