Installing the mechanical cable

Fig 1: Identifying Spring And Wire

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the spring and a new wire.

Fig 2: Identifying Seat Halves Self-Tapping Screw And Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Position the seat above the frame.

Install the screw (2) and tighten.

Remove the self-tapping screw (1) and at the same time lightly pull the wire so that the spring is correctly located.

Fig 3: Identifying Wire On Reel

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the wire on the reel according to the earlier note.
• the wire for the mounting in the backrest
• the reel in the mounting.

Fig 4: Identifying Mounting Clamped Together

Courtesy of VOLVO CARS OF NORTH AMERICA.

Clamp together the mounting for the wire reel.