Handling Non-Deployed SRS-Components: Handling
WARNING:
Non-deployed pyrotechnical SRS components must not be deployed or ignited inside the vehicle.
For disarming of non-deployed pyrotechnical SRS units, see: Non-triggered SRS components, destruction .
Individual SRS components must be removed according to the instructions for the relevant model.
- For the driver's airbag (SRS) see Airbag driver and passenger (SRS), replacing
- For the passenger airbag (SRS) see Airbag driver and passenger (SRS), replacing
- For the seat airbag (SIPS) see Airbag module seat (SIPS), replacing
- For the inflatable curtain (IC) see IC (inflatable curtain) module, replacing
- For the front seat belt tensioner, see Seat belts, replacing
- For the rear seat belt tensioner, see Installing the front seat belt buckle
- For supplemental restraint system module (SRS), see Supplemental restraint system module (SRS), replacing
- For the steering wheel, see Replacing the steering wheel
- For the contact reel, see Contact reel / steering wheel angle sensor, replacing .
WARNING:
Pyrotechnical SRS components must never be taken apart, repaired or transferred to another vehicle.
WARNING:
Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected, non-deployed SRS component. This could deploy the SRS component.