Removing the front bumper

Fig 1: Front Bumper Casing

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove: 

• the left and the right trim strip.

Fig 2: Identifying Bumper Cover Clips

Courtesy of VOLVO CARS OF NORTH AMERICA.

• the screws (1), 1 per side
• the 2 x front screws
• the 6 clips, on the upper side of the bumper cover
• the 2 clips on the underneath of the bumper (5).

Fig 3: Locating Fog Lamp Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Pull the bumper forward while pulling both the sides outwards so that the edge releases from the side bracket.

HINT: This operation is easier with two people. 

Separate the connector for the fog lamp.

Repeat the procedure on the other side.

Disconnect the quick-release connector for the headlamp washer (if applicable).