Hood Release Cable, Replacing
Remove:
- turn signal lamp. See Turn signal lamps, replacing
- the headlamps. See Headlamps
- the front section. See Front end
- the air cleaner (ACL) housing. See
See Remove the air cleaner (ACL) housing (removal), or
See Install the air cleaner (ACL) housing (installation)
- the soundproofing panel. See Soundproofing panel, replacing .
Fig 1: Removing Headlamps, Turn Signal Lamps, Front Section, ACL Housing, Soundproofing Panel, And Mechanical Cable
- the mechanical cable from the locks.
- the cable from the hood catch control. See Mechanism, hood release, replacing .
HINT: Fasten the new cable to the old cable in the passenger compartment.
HINT: Feed and pull the new cable to the correct position.
Install:
In reverse order.