LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S80 Base, 2.5 59, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Attached Components - Removal, Replacement And Installation >> Bumper With Mountings And Damping (2003) >> Casing, bumper rear, replacing >> Installation >> Fender liner

Fender liner

Fig 1: Identifying Fender Liner Installed In Bumper Cover Using Rivets
GLL105106Courtesy of VOLVO CARS OF NORTH AMERICA.

Install the fender liner in the bumper cover. Use rivets.

Install the wheels. Tighten to 110 Nm  .

scientia non olet · About LEMON Manuals