Safety Precautions

Always cut the current to the headlamps before replacing the lamps.

Do not touch the high and low beam stalk during work due to the high voltage and risk of explosion. Remove the keys and lock the car.

Allow the lamp to cool. Use protective goggles and gloves when replacing the lamp.

The glass body of the Bi-Xenon-lamp is filled with different gases and metal vapors which are under pressure. Never touch the glass body of the lamp. Only touch the lamp at the socket. Remove any finger prints from the glass using a cloth and alcohol.

The lamp must only be used in enclosed headlamps. The replaced Bi-Xenon lamp must be treated as hazardous waste and must be sent for recycling.