TV receiver (to the video)
Before taking any readings, read Connecting the breakout box and checking the ground terminal .
TV receiver terminals N1-N10 correspond to #1-#10 on the breakout box.
| Control module terminal | Breakout box terminal | Signal type | Ignition on | Other |
|---|---|---|---|---|
| N1 | #1 | - | - | - |
| N2 | #2 | - | - | - |
| N3 | #3 | - | - | - |
| N4 | #4 | - | - | - |
| N5 | #5 | Video signal | - | - |
| N6 | #6 | Signal ground, video signals | Ulow | - |
| N7 | #7 | Left audio channel | Alternating current when there is sound to the loudspeaker | 150 mV rms +/- 38 mV (1 kHz 30% mod) |
| N8 | #8 | Right audio channel | Alternating current when there is sound to the loudspeaker | 150 mV rms +/- 38 mV (1 kHz 30% mod) |
| N9 | #9 | signal ground, audio | Ulow | - |
| N10 | #10 | - | - | - |