TV receiver (to reverse camera and video)
Before taking any readings, see Connecting the breakout box and checking the ground terminal .
TV receiver terminals N1-N10 correspond to #47-#56 on the breakout box.
| Control module terminal | Breakout box terminal | Signal type | Ignition on | Signal specification |
|---|---|---|---|---|
| N1 | #47 | - | - | - |
| N2 | #48 | Power supply, rear camera | Ubat | - |
| N3 | #49 | Video signal, rear camera | - | - |
| N4 | #50 | Video signal ground, rear camera | Ulow | - |
| N5 | #51 | Video signal | - | - |
| N6 | #52 | Signal ground, video signals | Ulow | - |
| N7 | #53 | Left audio channel | Alternating current when there is sound to the loudspeaker | 150 mV rms +/- 38 mV (1 kHz 30% mod) |
| N8 | #54 | Right audio channel | Alternating current when there is sound to the loudspeaker | 150 mV rms +/- 38 mV (1 kHz 30% mod) |
| N9 | #55 | signal ground, audio | Ulow | - |
| N10 | #56 | - | - | - |