Installing and connecting the Global Positioning System (GPS) aerial
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Install the new Global Positioning System (GPS) aerial (1) in the guide hole. Press the Global Positioning System (GPS) aerial into place using the clip in the hole in the center of the rear edge of the parcel shelf as shown.
- Route the new cable (C in the kit graphic) for the Global Positioning System (GPS) aerial. Follow the routing of the existing loudspeaker cable inside the seat belt holder (2)
- Connect the cable to the Global Positioning System aerial
- Secure at the points (3)
- Route the cable through the lead-in (4) to the rear edge of the wheel arch.