Cable routing

Fig 1: Identifying Cable Ducts And Tie Strap

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Route the two cables under the carpet, along the left-hand side of the car, to the rear door.
• Route the cable further under and along the front cable duct (1). Continue along the right-hand side of the rear cable duct (2). On the large cable harness is a black/white (SB/W) solid core wire connected to one of the large connectors. This shall subsequently be connected to the relay box on the left-hand side in the bulkhead.
• Securely clamp the cables at the cable duct with tie strap (3) from the kit.

Applies to cars up to and including model year -2004 

Fig 2: Identifying Cable Duct, Harness, And Ground Terminals -2004

Courtesy of VOLVO CARS OF NORTH AMERICA.

Applies to cars from model year 2005- 

Fig 3: Identifying Cable Duct, Harness, And Ground Terminals 2005-

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Route the two cables under the carpet, along the left-hand side of the car, to the rear door.
• Route the cable further under and along the front cable duct (1). Continue along the right-hand side of the rear cable duct (2).

  On the large cable harness is a black/white (SB/W) solid core wire connected to one of the large connectors. This shall subsequently be connected to the relay box on the left-hand side in the bulkhead.

• Securely clamp the cables at the cable duct with tie strap (3) from the kit.