Installing, connecting the Global Positioning System (GPS) antenna

Fig 1: Installing And Connecting Global Positioning System Aerial

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Install the new Global Positioning System (GPS) antenna (1) in the guide hole. Press the clip into the hole in the center of the rear edge of the parcel shelf as shown.
• Route the new cable (C in the kit graphic) to the Global Positioning System (GPS) antenna. Follow the routing of the existing loudspeaker cable inside the seat belt holder (2).
• Connect the cable to the Global Positioning System antenna.
• Secure at the points (3).
• Route the cable through the hole (4) to the rear edge of the wheel arch.