Installing the control module

Fig 1: Taping Foam Pieces Of Tape To Control Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Tape the two foam pieces of tape to the control module.

Fig 2: Connecting Cables And Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Connect the connectors as shown.
  1. the adapter cable (1) to the control module
  2. the cable (2) from the microphone.
  3. cable (3) from the power supply and mute relay
  4. the cable (4) from the telephone holder.

Fig 3: Positioning Control Module On Top Of Member

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Position the control module on top of the member.

Fig 4: Securing Excess Cable To Inside Of Center Console With Tie Strap

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Take a tie strap from the kit and secure the excess cable to the inside of the center console.

Reinstall: 

• the radio and dashboard environment panel
• the gear lever panel
• the dashboard end panel
• the glove box
• the sound barrier
• the side panel for the center console.

Fig 5: Connecting Negative Battery Lead

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Turn the ignition key to position II.
• Reconnect the battery negative lead