Headlamp/Bulb, Replacing: Removal: Headlamps

Fig 1: Headlamp Components

Courtesy of VOLVO CARS OF NORTH AMERICA.

Switch off the ignition
Set the switch for external lighting to zero
Remove the front turn signal lamp. See Turn signal lamps, replacing
Remove the headlamp wiper arm and the headlamp wiper motor. See Wiper arm and wiper motor, headlamp, replacing
Remove the bumper casing on the relevant side. Remove the clips above the grille. See Casing, bumper front, replacing
Carefully pry the casing down and out. Remove the innermost and the outermost screws for the headlamp
Remove the uppermost screws from the headlamp
Remove the headlamp.
NOTE:
Completely remove the bumper cover when removing both headlamps.

If there are misting problems in the headlamp. See If Misting Problems Arise .

Fig 2: Identifying Parking Lamps, Low Beam, And High Beam

Courtesy of VOLVO CARS OF NORTH AMERICA.

The illustration shows the left headlamp.

Parking lamps
Dipped beam
High beam.

NOTE:

From week 0026 inclusive, the parking lamps in the US market will be integrated in the headlamp unit rather than in the turn signal lamps.

If replacing the headlamp on a car manufactured prior to week 0026, the parking lamp remains integrated in the turn signal lamps so that both headlamps are configured in the same way. If the parking lamp lights in the headlamp unit, remove the bulb for the parking lamp.