Headlamp/Bulb, Replacing: Removal: Bulb

Fig 1: Identifying Low Beam Removal Procedure

Courtesy of VOLVO CARS OF NORTH AMERICA.

High and low beams 

• Disconnect and push the hose for the control module box to one side (when replacing on the right-hand side)
• Twist off the cover (1)
• Disconnect the connector (2)
• Press the spring clip forward to the right. Then fold backwards and downwards (3)
• Remove the bulb (4).

Fig 2: Identifying Lamp Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Parking lamps 

• Disconnect and push the hose for the control module box to one side (when replacing on the right-hand side)
• Twist off the cover
• Pull off the holder with the bulb
• Pull the bulb out from the holder.