Checking MD/CD player and disc

Check that there is no condensation on the disc.

Check that the disc is correctly inserted.

Try a new disc.

Remedy as necessary.

If no fault is found replace the head unit/audio module.

CAUTION:

New head unit/audio control modules are supplied without software. The head unit/audio control module must be programmed after it has been replaced.

Other information:

For information about programming and replacing the head unit/audio control module:
- For -2004, see:Radio cassette player, replacing .
- For 2005-, see:Audio unit, replacing .

Continue when the fault has been remedied.