Installing the handsfree box
Applies to both Ericsson and Nokia
Fig 1: Positioning Hands Free Box And Bracket With Mounting Over Screw Hole In Mounting For Driver's Seat
NOTE:
Install the aerial according to the separate Installation Instructions.
- Tip the driver's seat back slightly
- Position the hands free box and the bracket with the mounting over the screw hole in the right front mounting for the driver's seat
- Fold the seat down towards the mountings. Check that the bracket for the hands free box is positioned under the seat rail
- Clamp the cables.
NOTE:
It must be possible to operate the seat without the cables stretching or breaking.
NOTE:
Ensure that the none of the wiring is trapped.
- Tighten the front edge of the seat. Use two new screws
- Tighten to 40 Nm (30 lbf. ft.)
- Reinstall the covers for the screws.