Installing the external base module

Fig 1: Checking Position Of External Base Module And Antenna

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check the position as shown. Ensure that the antenna is clear of the windscreen trim and wiper blade. Ensure that the antenna can be removed from the external base module when washing the car etc.

• Carefully clean the surface of the glass. Use the cleaning cloth supplied. Wipe dry using a rag
• For optimum adhesion, warm the glass. Use a hairdryer for example
• Remove the backing from the external base module. Secure the external base module on the windscreen. Press hard for 20 seconds
• Ensure that the tape is sealed around the external base module.