Checking the relay

Check relay 2/80 operation by activating and deactivating the relay several times. The relay is working if a clicking noise is heard when activating and deactivating.

If the relay is not working, replace it with a new relay.

Additional information: 

• To access/replace relay/fuse box in the boot, see Integrated relay/fusebox cargo compartment/Rear electronic module (REM), replacing .

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Relays

Courtesy of VOLVO CARS OF NORTH AMERICA.

Is there a fault? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Checking the wires and components 

Check relay 2/80 operation by activating and deactivating the relay several times. The relay is working if a clicking noise is heard when activating and deactivating.

If the relay is not working, replace it with a new relay.

Additional information: 

• To access relay/fuse box in the boot, see Integrated relay/fusebox cargo compartment/Rear electronic module (REM), replacing .

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Relays

Courtesy of VOLVO CARS OF NORTH AMERICA.

Is there a fault? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to Checking the wires