Programming a short interior lighting period

The general lighting and rear reading lamps light and remain lit for 30 seconds when:

• The door has been unlocked from outside with a key or the remote control.
• The engine has been stopped and the ignition key turned to 0.

The default period is 30 seconds. This can be changed to between 5 and 255 seconds.

Read off the programmed values.

To change the time, mark the desired value in the scrolling list and start programming.

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Do you want to program any more parameters? 

• YES 

  Refer to Programming a long interior lighting period 

• NO 

  OKAY:  Troubleshooting has been completed.