Checking wiring or terminals
Communication between the remote control and the remote start unit is OK. Fault-tracing indicates that the wiring or terminals between the remote start unit and the accessory electronic module (AEM) are defective.
Remedy as necessary.
Other information:
- To connect the breakout box, see Connecting the breakout box. Accessory electronic module
- To access or replace the Accessory Electronic Module (AEM) and connector, see Replacing the accessory electronic module
- For information about signals, see Signal description. Accessory electronic module (AEM)
- To fault-trace wiring and terminals see Contents
- Continue
Refer to Verification