Checking components and wiring (without RTI)
- Ignition off
- Disconnect the audio / carphone switch by disconnecting the lower connector on the audio / carphone switch
- Ignition on.
Activate the buttons. Read off the status of the buttons in the cruise control switch
If the readings give a correct result, the fault is in the audio / carphone switch.
Other information:
- To access the audio / carphone switch, see Keypad steering wheel, replacing .
Was the status of the cruise control switch OK?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to Checking components and wiring