Installing backrest cushion upholstery

Install: 

• the upholstery on the backrest
• the three half moon clips on the inside of the reverse of the backrest
• the two elastic attachments in the inside of the reverse of the backrest
• one half moon clip in each side of the front-rear channels.

Install the upholstery up to the first lateral channel. There must be two half moon clips per each front-rear channel.

Install the upholstery all the way down.

Install five half moon clips at the bottom edge of the backrest.

Fold the backrest to the normal position.

Install: 

• the backrest adjustment knob. Push the knob straight in
• the lumbar support knob
• the cover.

Tension the lumbar support.