Rear End Collision Module Front Seat
Operation Number(s): 85244-2
NOTE:
Removal steps in this procedure may contain installation details.
Only applies to vehicle with fixed backrest.
Remove the front seat according to Front Seat, Replacing .
CAUTION:
The operation must be performed on both sides of the seat.
NOTE:
On both sides.
NOTE:
On both sides.
Loosen and fold aside the backrest cushion's upholstery according to Upholstery Back Rest, Replacing .
WARNING:
Be extra careful when handling the compressed spring.
Only applies to vehicle with foldable backrest.
Remove the front seat according to Front Seat, Replacing .
CAUTION:
The operation must be performed on both sides of the seat.
NOTE:
On both sides.
NOTE:
On both sides.
Loosen and fold aside the backrest cushion's upholstery according to Upholstery Back Rest, Replacing .
WARNING:
Be extra careful when handling the compressed spring.
To install, reverse the removal procedure