Transferring Components
Remove on both sides:
- screw, 1 pc. (1)
- screw, 1 pc. (2).
Remove on both sides:
- 1 screw
- longitudinal stay with link arms and track rod.
Remove the old subframe and install the new one on the lifting table.
The new subframe's parts.
Install:
- longitudinal stay with link arms and track rod
- the screw.
Do not tighten yet.
Install:
- screw 1 pc. (1)
- screw, 1 pc. (2).
Do not tighten yet.