Rear Lower Arm: Finishing

Fig 1: Identifying Sway Bar Link Ends

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the ball joints
• the 4 nuts. Use a Torx wrench as a counterhold so that the boot is not damaged. Tighten. See: TIGHTENING TORQUE
• the spring

  See: SPRING (B5254T7, AW55-50/51SN; 2011)or SPRING (AW50/51 AWD; M66 AWD; 2005-2010)

• the wheel. See: WHEELS .

Perform a four wheel check. See: WHEEL ANGLES, CHECK .