Catalytic Converter: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Perform flange joint, assembly FLANGED JOINT, ASSEMBLING

Fig 1: Removing/Installing Reinforcement

Courtesy of VOLVO CARS OF NORTH AMERICA.

Torque: M8

24 Nm

Fig 2: Viewing Catalyst to Manifold Bolts

Courtesy of VOLVO CARS OF NORTH AMERICA.

Torque: Catalyst to exhaust manifold

27 Nm

Fig 3: Viewing Catalyst to Manifold Bolts

Courtesy of VOLVO CARS OF NORTH AMERICA.

Torque: Catalyst to exhaust manifold

27 Nm

Fig 4: View of Catalyst Mounting and Nuts

Courtesy of VOLVO CARS OF NORTH AMERICA.

Torque: Catalyst to exhaust system

24 Nm