Air Cleaner Housing: Removal

NOTE:

Removal steps in this procedure may contain installation details.

Remove the engine control module (ECM) see ENGINE CONTROL MODULE (ECM)

Fig 1: Remove/Install Cover

Courtesy of VOLVO CARS OF NORTH AMERICA.

Torque: M6

10 Nm

Fig 2: Remove/Install Clamp and Tubing

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Remove/Install Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 4: Locating Fasteners

Courtesy of VOLVO CARS OF NORTH AMERICA.

Torque: M6

10 Nm

Fig 5: Removing/Installing Engine Mount

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION:

Note the position of the component before removal.

Torque: M10

50 Nm

Fig 6: Removing/Installing Air Tube

Courtesy of VOLVO CARS OF NORTH AMERICA.

NOTE:

This step requires considerable force.

Fig 7: Removing/Installing Air Cleaner Module

Courtesy of VOLVO CARS OF NORTH AMERICA.