Attach the gearbox mounting to the side of the body.

WARNING: This page is about a different variant/trim than selected.

Fig 1: Gearbox Mounting Bolts With Torque Specifications

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fit the mounting to the gearbox and secure with three bolts.

Use lifting hook 9995460 to lift the engine and fit the bolt to the chassis support.

Fit the three bolts and tighten to 45 Nm .

Lower the engine until the lifting brace no longer supports it.

Tighten the bolt on the side of the body to 98 Nm .

NOTE:

Be careful of the hydraulic pipe to the clutch.