Checking Components

Check that the headlamp washer fuse is intact.

Check that the washer reservoir level is above 1 liter.

HINT: "Reading off parameters, digital display" under vehicle communication can be used to check that the windshield washer reservoir level is above one liter. 

Checking the relay 

Check that the headlamp washer relay is correctly installed.

Also check the relay terminal, in particular terminal #5. Check for a short-circuit to ground.

Check the function of the headlamp washer relay. Activate and deactivate the relay a number of times. The relay is functioning if there is a clicking sound when the relay is activated and deactivated.

Click the VCT2000 symbol to activate and deactivate the relay.

Remedy as necessary

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS OF NORTH AMERICA.

Was a fault detected? 

• YES 

  Refer to VERIFICATION 

• NO 

  Refer to CHECKING WIRING