Checking Remote Receiver

The remote receiver is fitted above the headlining to the left of the central lighting panel, level with the sun visor. The remote receiver is connected to Central electronic module (CEM) or to Keyless vehicle module (KVM) depending on the vehicle's configuration.

Check whether the diagnostic trouble codes for missing communication with the remote control are stored in the Central electronic module (CEM) or in the Keyless vehicle module (KVM), depending on the configuration of the vehicle.

Check that the remote receiver works by pressing the lock and unlock button on the remote control. The vehicle should be locked and unlocked.

Does the remote control and remote receiver work? 

• YES 

  Refer to CHECKING TIRE PRESSURE SENSORS 

• NO 

  OKAY:  Troubleshooting has been completed.