Connector Control Module Extra Safety System: Disassembly

DISASSEMBLING SECONDARY LOCK

Fig 1: Identifying Receptacle Housings Removal

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press in the active catches on both sides of the socket housing and slide out the receptacle housings.

CAUTION:

Disconnect and work with only one cable at a time to minimize the risk of mixing them up.

DISASSEMBLING PRIMARY LOCK

Fig 2: Identifying Locking Tab Pressed In On Cable Terminal Using Special Tool 9512812

Courtesy of VOLVO CARS OF NORTH AMERICA.

Press in the locking tab on the cable terminal and carefully pull out the cable and the cable terminal. Use tool: 9512812 or tool 9512637 , see the graphic.