Secure the Lower Control Arm

Fig 1: Identifying Trailing Arm Screw, Shock Absorber Screw And Bodywork Screw

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the support and bounce the car a few times.

Install the adjustment screw in its earlier position.

Tighten the screw:

• on the trailing arm. Tighten to 90 Nm 
• on the shock absorber. Tighten to 80 Nm 
• the bodywork. Tighten to 80 Nm  .

Install the anti-roll bar link on the lower control arm. Tighten to 45 Nm  .