Remove throttle cable and connectors

Fig 1: Removing Throttle Cable And Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

• The inner cable at full throttle
  • The throttle position (TP) sensor
  • The idle air control (IAC) valve
  • The H02S
  • The knock sensor (KS).
• The clip and take the outer cable out
  • The throttle position (TP) sensor
  • The idle air control (IAC) valve
  • The H02S
  • The knock sensor (KS).
• The relay bracket cover and the connectors:
  • The throttle position (TP) sensor
  • The idle air control (IAC) valve
  • The H02S
  • The knock sensor (KS).
• The brake servo hose from the engine.