Installing the charge air cooler (CAC)

Fig 1: Installing Charge Air Cooler (CAC)

Courtesy of VOLVO CARS OF NORTH AMERICA.

See Replacing the intake air temperature sensor when the charge air cooler (CAC) has been replaced
Carefully install the charge air cooler (CAC). Position the radiator on the charge air cooler (CAC).
NOTE: Press the oil cooler into place in the charge air cooler (CAC).
Install the two cooler mountings using the screws. Tighten the screws to 25 Nm
Clean the connection surfaces. Connect the air intake hose. Tighten the clamp
Connect the idling hose. Tighten the clamp.