LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S40 Base, 1.9 27 >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft Seals - Removal & Installation (644 Body) >> Driveline/Axles >> Right-hand side drive shaft seal, replacing >> Installation >> Installing the drive shaft

Installing the drive shaft

Fig 1: Locating Drive Shaft Screws And Lock Nuts
GLL109208Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

Locate stub axle to spring strut. Install screws and new lock nuts loosely.

CAUTION:

Ensure that the sealing ring in the transmission and the drive shaft boots are not damaged.

Remove the mobile jack.