LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2004 >> S40 Base, 1.9 27 >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft Seals - Removal & Installation (644 Body) >> Driveline/Axles >> Left-hand side drive shaft seal, replacing >> Installation >> Installing the seal

Installing the seal

Fig 1: Using Drift 999 5541 And Rubber Mallet To Install Seal
GLL126301Courtesy of VOLVO CARS OF NORTH AMERICA.

Lubricate the seal lip. Use grease, P/N 1161241-3. Use drift 9995541 and a rubber mallet to install the seal. Turn the M56 marking towards the seal.

Tap in the seal until the drift is against the transmission.

scientia non olet · About LEMON Manuals