Seams, Check (S40 (-04)/V40)

Fig 1: Rear Bumper Seams (1 Of 2)

Courtesy of VOLVO CARS OF NORTH AMERICA.

Begin by removing the bumper and tail lamp.

Use sealing putty to seal the openings. Apply and spread the sealing putty correctly.

Wipe off any excess sealing putty.

Apply the original paint color after the putty has hardened.

Fig 2: Rear Bumper Seams (2 Of 2)

Courtesy of VOLVO CARS OF NORTH AMERICA.

Check the sealing putty over the seams, especially in the spots indicated as shown.

Check that the adjuster remains flat. Apply sealing putty if necessary.

Use body putty to seal the openings. Apply and spread the sealing putty correctly.

Apply the original paint colour after the sealing putty has hardened.