IC (inflatable curtain): Preparation
Disconnect the battery lead.
See Battery, disconnecting .
NOTE:
Do not fold or twist the IC (inflatable curtain) during removal or installation. No components may be opened. Do not remove, slacken off or tighten any screws.
NOTE:
The IC (inflatable curtain) module must be handled with both hands, with one hand encompassing the gas generator.
NOTE:
The IC (inflatable curtain) module must be kept level.
NOTE:
Avoid twisting or bending the IC (inflatable curtain) module as much as is possible.
NOTE:
The IC (inflatable curtain) module must be returned if there is any "visible damage".
NOTE:
Do not position or install accessories or any other components in the area marked. Failure to observe this instruction may cause the IC (inflatable curtain) to fail.