Installing the passenger airbag module

Fig 1: Distribution Pipe Screws

Courtesy of VOLVO CARS OF NORTH AMERICA.

WARNING: The passenger airbag module must be handled according to the instructions. See Handling non-deployed airbag modules/pyrotechnic seat belt tensioners .

Carefully position the passenger airbag module in the dashboard.

Install:

the two screws. Tighten to 9 Nm
the ventilation pipe with four screws
the green connector for the passenger airbag module.

WARNING: Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected, non-deployed passenger airbag module. The passenger airbag module may be deployed.