Replacing the component
- Raise the car so that the wheels are accessible
- Start the engine and select a gear or rotate one of the front wheels by hand.
Check the speed signal from the ABS module.
If an incorrect value is noted it means that the ABS control module is defective. Replace the ABS control module.
If the correct value is noted it means that the combined instrument panel is defective. Replace the combined instrument panel.
Remedy as necessary.
Other information:
- To connect the breakout box, see Connecting the breakout box
- To access and replace the combined instrument panel, see Driver information module, removing/installing
- For information about signals, see Signal specification .
- Continue
Refer to Verification