LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2003 >> XC90 T-6 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper Rail, Grille, Hood Catch And Mudguard - Removal, Replacement And Installation >> Hood (2003-2011) >> Hood Catch, Replacing >> Hood Release Catch (Right-Hand Side), Replacing >> Installing The Hood Release Catch (Right-Hand Side)

Installing The Hood Release Catch (Right-Hand Side)

NOTE:

For tightening torques, see TIGHTENING TORQUE .

Install the hood catch.

Secure the hood catch using the 2 M6 screws. Finger tighten.

HINT: Do not tighten the screws for the hood catch until the hood is closed (see the illustration). 

Close the hood.

Tighten the 2 M6 screws for the hood catch.

Open the hood.

Install the headlamp. See HEADLIGHT/BULB, REPLACING (2003-2006) or HEADLIGHT/BULB, REPLACING (2007-2012).

scientia non olet · About LEMON Manuals