Installing The Brake Lamp Switch

Fig 1: Brake Lamp Switch And Catches

Courtesy of VOLVO CARS CORPORATION

NOTE: Check that the white locking sleeve has been completely withdrawn towards the tip of the brake lamp switch. Also check that the catches (4) do not catch against the white locking sleeve.

NOTE: Brake pedal must be depressed.

Install:

the connector
the brake lamp switch. Check location of switch in bracket.

Press the brake lamp switch into place. There is a click when the catches engage with the bracket.

Remove the pedal jack

The brake lamp switch is now set to the default adjustment.

Check the function of the brake lamp.